BuyerGlobal TradeIndian SuppliersProcurement

CBAM in 2026: what data to ask your Indian casting and fastener suppliers for

CBAM has been in its definitive phase since 1 January 2026. Which Indian casting, forging and fastener parts are in scope, and the exact emissions data an EU importer should request from each supplier plant.

EV Industry Team
Nov 1, 2026

05_Buyer_post_cover.png

If you import bolts from Ludhiana or steel brackets from Pune into the EU, 2026 is the first year CBAM costs money.

The definitive phase started on 1 January 2026. Your first annual CBAM declaration, covering everything imported this year, is due by 30 September 2027. The numbers in that declaration come from your suppliers. Ask for them early. Many suppliers will need months to collect them.

This is the request we would send, and the checks we would run first.

Step 1: Check the CN code before you ask for anything

CBAM does not cover "steel parts". It covers specific CN codes. For a component buyer the ones that matter today are:

In scope todayNot in scope today
7318: screws, bolts, nuts, washers, rivets7325: other cast articles of iron or steel
7326: other articles of iron or steel8708: parts and accessories for motor vehicles
7301 to 7311: tubes, pipes, structures, tanks, containers
Chapter 72: iron and steel, including bars, wire and flat products
7601 and 7603 to 7614, 7616: aluminium, including other articles of aluminium

The practical result: a fastener almost always sits in 7318 and is in scope. A casting depends on how it is classified. An iron casting declared as a vehicle part under 8708 is outside CBAM today. The same casting declared under 7326 is inside.

So ask your customs team for the CN code of every Indian part first. Then send data requests only for the parts that need them.

Watch the scope. In December 2025 the European Commission proposed adding about 180 downstream products from 1 January 2028. The list includes vehicle parts such as gearboxes (8708 40), road wheels (8708 70) and radiators (8708 91). Parliament voted its position on 15 September 2026 and the Council agreed its approach in June. Negotiations between them are running now. It is not law yet, but plan for a wider list.

Step 2: Check if you are above the threshold

Importers who bring in 50 tonnes or less of CBAM goods in a calendar year are exempt. The 50 tonnes is per importer and counts iron and steel, aluminium, cement and fertilisers together.

Above that, you need to be an authorised CBAM declarant. A mid size Tier 1 buying fasteners and brackets from India will pass 50 tonnes quickly.

Step 3: Understand why supplier data saves money

If you have no actual data from the supplier, you declare default values set by the Commission per country and product. Those defaults carry a mark up: 10% in 2026, 20% in 2027 and 30% from 2028 onwards.

Defaults are built to be conservative. An efficient Indian plant with good data can come out lower. That difference is paid in CBAM certificates, which go on sale from February 2027. From 2027 you also need to hold certificates for at least 50% of the embedded emissions of your imports at the end of each quarter.

In other words, the supplier who can give you clean, verified data is cheaper than the price sheet shows.

Step 4: The data request

Send this to each Indian supplier with a CBAM part. Ask for it per plant, not per company.

Ask forWhy
Name and full address of the plant that makes the partCBAM data is reported per installation. Head office data does not count
CN code and tonnes produced in the reporting periodEmissions are reported per tonne of product
Production routeHow the part is made, for example wire drawn, cold forged and heat treated
Direct embedded emissions, in tonnes CO2e per tonne of productFor iron, steel and aluminium only direct emissions count. Electricity is not included
Precursors used: tonnes of wire rod, bar, billet or aluminium ingot, and which mill supplied themThe emissions of the steel or aluminium input are part of your part's total
Embedded emissions of those precursors, from the millOften the largest share of the total
Any carbon price paid in India, with proofCan reduce the certificates you surrender
A verification report from an accredited CBAM verifierActual values must be verified before you can use them in the declaration

The Commission publishes an Excel communication template for exactly this exchange. Its Summary_Communication sheet holds what the declarant needs. It is recommended, not mandatory, but asking suppliers to use it saves a lot of back and forth.

Suppliers can also register on the O3CI portal in the CBAM Registry and share their data there with all their EU customers at once. Tell your suppliers it exists.

Step 5: Expect the precursor problem

Here is where most requests stall.

A Ludhiana fastener maker does not make steel. It buys wire rod from a mill. The fastener maker's own furnace and heat treatment emissions are the small part. The big part sits with the mill.

So the real question is not "can my supplier calculate emissions" but "can my supplier get data from its mill". Ask which mill supplies the wire rod or bar, and whether that mill already provides CBAM data to exporters. If it does not, the supplier may need to switch steel source, or you fall back to defaults for the precursor.

Castings and forgings have the same issue with pig iron, scrap mix and billet. Ask early.

Step 6: Do not wait for the trade deal

The EU and India concluded their free trade agreement negotiations on 27 January 2026. It gives India no CBAM exemption. The Commission said India's treatment will not be more favourable than that of other countries. Plan as if the rules apply in full.

A timeline that works

  1. Now: list every Indian part with its CN code and yearly tonnes
  2. November: send the data request to every supplier with a CBAM part
  3. By Q1 2027: get first numbers back and check them against defaults
  4. Q2 2027: make sure each plant has booked an accredited verifier
  5. By 30 September 2027: file the 2026 declaration and surrender certificates

Where the fastener and casting suppliers are

As of 24 October 2026, Voltbridge lists 58 fastener suppliers in India, and 43 of them show IATF 16949 on their profile. The largest groups are in Ludhiana (16), Mumbai (9) and Faridabad (6). We list more than 80 casting suppliers, led by Rajkot. If you are planning visits, our post on India EV supplier clusters shows which city to go to for which process.

When you shortlist new sources, add one question to the first call: can you give us verified CBAM data for this plant, including your steel supplier's numbers? The answer tells you a lot about how the supplier runs.

This is a practical summary for buyers, not legal advice. Check the details with your customs advisor.

Find suppliers who can answer the data request

Search Indian fastener, casting and forging suppliers by category, location and certification, and shortlist before you send the request.

Browse Indian fastener and casting suppliers

Voltbridge Research

E

EV Industry Team

Our team of industry experts bringing you the latest insights.